EN 21
D Showing on-screen display
When “SUPERIMPOSE” is set to “ON” (☞ pg. 33), you can see the current VCR status on the TV screen.
●For more detailed information about the
1 Display VCR status on TV screen
During recording or | CH | 125 |
| RECORD | |||
recording pause, press | THU 12:00 AM |
| PAUSE | ||||
OSD. | STEREO |
| ] SP | ||||
SAP |
|
|
|
|
| ||
All indications | B | + | + | + |
| E | |
corresponding to the |
| ||||||
|
|
| |||||
current VCR status are | NORM |
| |||||
COUNT | |||||||
displayed for 5 seconds. |
| ||||||
|
|
|
|
|
| ||
The time counter remains
on the screen indicating the elapsed time.
●The indications are not recorded.
2 Erase on-screen display
Press OSD again.
NOTE:
●If the VCR is in recording pause mode, “RECORD/PAUSE” is always displayed.
●The VCR status can be also displayed during playback.
Accidental erasure prevention
To prevent accidental recording on a recorded cassette, remove its record safety tab.
To record on it later, cover the hole with adhesive tape.
Record safety tab
Other useful functions for recording
You can also use the following functions for recording.
●Recording Resume Function
If there is a power outage during recording (or Instant Timer Recording, or timer recording), the recording will resume automatically when the power is restored to the VCR. (No setting is required for this function.)
●Video Calibration (☞ pg. 33)
When this function is set to “ON”, this VCR checks the condition of the tape in use during playback and recording, and compensates to provide the highest- possible pictures.
●Second Audio Recording (☞ pg. 35)
This VCR’s
To record a SAP program received, set “2ND AUDIO RECORD” to “ON” using the menu screen.
Note:
When the channel is changed on the VCR;
●The “STEREO” indication appears on the screen for about 5 seconds if the program is a stereo broadcast.
●The “SAP” indication appears on the screen for about 5 seconds if the program is a SAP broadcast.
●Both indications appear when a stereo program is accompanied by SAP sound.
