JVC HR-XV2EK Connecting to Optional Equipment, Important notes on controlling this unit, Connections (Cont’d) / Important notes on controlling this unit

Connections (Cont’d) / Important notes on controlling this unit

Connecting to Optional Equipment

Connecting to an amplifier equipped with two channel analog stereo or Dolby Surround

Connect the Left and Right Audio out jacks on this unit to the audio left and right in jacks on your amplifier, receiver or stereo system, using the audio cables.

Notes

–If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all.

–To see the audio format of the current DVD in the On-Screen Display, press AUDIO MONITOR.

Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/ Video receiver equipped with a multi-channel decoder (Dolby Digital™, MPEG 2 or DTS)

1(COAXIAL or OPTICAL) to the corresponding in

jack on your amplifier. Use an optional digital (COAXIAL or OPTICAL) audio cable.Connect this unit’s DIGITAL AUDIO OUT jack

2 You will need to activate this unit’s digital output. (See “Digital Audio Output” on page 20).

Digital Multi-channel sound

A digital multi-channel connection provides the best sound quality. For this you need a multi-channel Audio/Video receiver that supports one or more of the audio formats supported by your unit (MPEG 2, Dolby Digital and DTS). Check the receiver manual and the logos on the front of the receiver.

Warning:

Due to the DTS Licensing agreement, the digital output will be in DTS digital out when DTS audio stream is selected.

Rear of this unit

VHS IN+OUT/DVD OUT

EURO AV2 DECODER	DVD EXCLUSIVE OUT
DVD/VCR
	COMPONENT	AUDIO
AUDIO OUT
	VIDEO OUT	OUT

DIGITAL
AUDIO OUT
R	Pr	R
L	Pb	L
EURO AV1 AUDIO/VIDEO
OPTICAL
S-VIDEOOUT	Y	COAXIAL

2 channel analog stereo or Dolby Surround connection.

DVD exclusive out

Important notes on controlling this unit

This unit uses one set of controls to operate VCR, DVD and JVC TV. The following buttons are helpful in successfully controlling each part.

* First, select TV or VCR/DVD with the slide switch.

POWER Button

1 Press the POWER button on the remote control or front panel to turn on this unit.

DVD Button

2 Press DVD button on the remote control when you want to control the DVD.

The DVD indicator will light on the front panel display to show that the DVD is selected.

VCR Button

3 Press the VCR button on the remote control when you want to control the VCR.

The VCR indicator will light on the front panel display to show that the VCR is selected.

4Press the VCR/DVD button on the front panel to toggle control between the DVD and the VCR.VCR/DVD Button

Digital multi-channel connection (DVD exclusive out connecttion)

OPTICAL	L	R	COAXIAL
DIGITAL INPUT	AUDIO INPUT		DIGITAL INPUT

Amplifier (Receiver)

12