RF coaxial connection
Connect the RF.OUT jack on the DVD+VCR to the antenna in jack on the TV using the supplied
How to set the DVD+VCR’s RF output channel
1.When the DVD+VCR is turned off, press and hold both CH - and CH + on the front panel for more than five seconds. “RF03” or “RF04” appears in the display window.
2.Press either CH - or CH + to change the RF output channel (RF03 or RF04). Tune the TV to this channel.
3.Turn off the DVD+VCR.
Audio/Video connection
1.Connect the DVD/VCR VIDEO OUT jack on the DVD+VCR to the video in jack on the TV using an optional video cable (V).
2.Connect the Left and Right DVD/VCR AUDIO OUT jacks on the DVD+VCR to the audio left/right in jacks on the TV (A1) using an optional audio cables.
Note:
If you use this connection, set the TV’s source selector to VIDEO.
Optional TV Connections
These connections support only DVD playback. The tuner and VCR still output through the RF.OUT (R) or DVD/VCR OUT (A, V) jacks.
Component Video / Progressive Scan connection
If your television is a
1.Connect the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks on the DVD+VCR to the corresponding in jacks on the TV using an optional Y Pb Pr cable (C).
2.Connect the Left and Right AUDIO OUT jacks of the DVD+VCR to the audio left/right in jacks on the TV (A2) using an optional audio cables.
Notes:
•When you use Composite Video signal, set the Progressive Scan to “Off” on the setup menu.
•Progressive scan does not work with the Composite video connections (yellow VIDEO OUT jack).
•If your TV does not accept the Progressive Scan for- mat, the picture will appear scrambled. Switch to composite video output.
Audio Connection for DVD
You can listen to playback using DVD/VCR AUDIO OUT (A1), AUDIO OUT (A2), COAXIAL
(X)and RF. OUT (R) connections. COAXIAL (X) and AUDIO OUT (A2) is used only for listening to DVD playback. (See page 11.)
Connecting to an amplifier equipped with two channel analog stereo
Connect the Left and Right AUDIO OUT (or DVD/VCR AUDIO OUT) jacks on the DVD+VCR to the audio left and right in jacks on your amplifi- er, receiver, or stereo system using an optional audio cables (A1, A2).
12
