23
Operation
Channel: Select a TV channel, LINE1 or
LINE2. If you have CABLE TV and use a cable
box (converter) you must set the channel to
match the cable box output channel (usually
CH 3 or 4). Change channels on the cable box
instead of with the DVD+VCR. If you use a
cable converter, you can program multiple
recordings only on the converter box output
channel. This is because the converter deter-
mines what channel you view through your
DVD+VCR.
Speed:AUTO mode determines how much
tape is left and switches the speed from SP to
SLP if it is necessary to complete recording
the program.
If this occurs there could be some picture and
sound distortion at the point where the speed
changes.
Repeat: To record up to 8 programs on a cer-
tain day of every week select WEEKLY. To
record up to 8 programs at the same time
Monday through Friday select DAILY.
Otherwise select ONCE.
7. Press SETUP MENU and the program is
memorized by the DVD+VCR.
8. Additional programs may be entered by
repeating steps 1-7.
9. Ensure you insert a tape with the record safety
tab intact before the first programmed time.
10.Press STOP (x) to end timer recording.
Notes:
•If you make a mistake or want to change a setting,
use vto select the option and correct it using b / B.
•If the program preset time is past, the “PAST TIME
PROGRAMMED”message appears on the TV
screen. Return to the incorrect program and pro-
gram it with the correct time.
•If you enter a past date, the timer recording will be
performed on that date of the next year.
•If the power fails or the DVD+VCR is unplugged the
clock and timer settings are kept in memory for only
3 seconds. Otherwise you must reset the clock and
timer.
•If the tape indicator is blinking, no tape is loaded.
•When you are playing DVD at programmed
Recording time, the DVD+VCR automatically
change to VCR mode and start recording.
•The DVD+VCR will automatically power off when
Timer Recording ends.
Checking or Erasing the Timer Program
Programming can be checked whenever the
DVD+VCR is turned on.
1. Press SETUP MENU and the MAIN menu
appears.
2. Use v / Vto choose the PROGRAM menu
and press ENTER / OK.
3. Use b / Bto select a program you want to
check or erase. To erase the program, press
CLEAR (0000).
4. Press SETUP MENU to return to the TV
screen.
Program Priority
If the recording start and end times of preset pro-
grams overlap on the same day (see the exam-
ple), the second program is not recorded until the
first is finished.
In this example, the first part of program numbers
2 and 3 are not recorded.
H◗❇✵✼❆❚❘✵✽❘❚❘✸✲✵✤✤✴✹✲✺✲✵✸✤✤ ✵✵✾✴✻✤❅M✤✤y✶✷