Masterpage:Right

EN 71

Filename [XVC27U_09Editing.fm]
Page 71 6 January 2004 7:51 pm

EDITING (DVD DECK)

Digital Audio

Dubbing

You can dub selected audio from the DVD or Audio CD disc to a
MD etc.
However, it is not possible to dub the copy-protected disc.
Example: Dubbing to a MD
AMake connections.
Connect the coaxial cable between the unit and the
digital audio device.
BPlace a disc and load a MD.
For the DVD deck
APress OPEN/CLOSE (x) on the DVD deck to open the
disc tray.
BPlace the disc in the disc tray.
CPress OPEN/CLOSE (x) on the DVD deck to close the
disc tray.
For the digital audio device
Insert a MD.
CPrepare the DVD deck for dubbing.
APress DVD and select the audio to be dubbed.
BSearch for the point where you want to start dubbing
by pressing PLAY (4), FF (5) or REW (3) then
press STOP (8).
CPress REW (3) a little, then press PLAY (4) to start
playback.
DPress PAUSE (9) to pause playback a little before the
start point.
DPrepare the audio device for dubbing.
Select the input mode.
EStart dubbing.
APress PLAY (4) to start playback on the DVD deck.
BStart recording on the audio device.
FEnd dubbing.
Stop recording on the audio device. Then press STOP (8)
to stop playback on the DVD deck.
NOTES:
There may be a discrepancy of several seconds between where
you intend editing to start, and where it actually starts.
You can also dub a Video CD or SVCD. Set “DIGITAL AUDIO
OUTPUT” to “PCM ONLY”. (pg. 78)
Turn on the TV and select the VCR channel (or AV
mode).
Slide the TV/VCR/DVD switch to the right.
Rear of unit
Digital audio device
(MD deck etc.)
Coaxial cable
(not supplied)
DIGITAL AUDIO OUT
Player
Recorder
XVC27U_01.book Page 71 Wednesday, January 7, 2004 10:48 AM