EN 69
Edit To Or From
Another Video
Recorder
A |
|
|
TV receiver | Player | Your unit |
| Audio/video cable | Audio/video |
| cable | |
AV mode |
| |
|
| |
| Another recorder | |
| Recorder |
|
B TV receiver | Recorder | Your unit |
| Audio/video cable | Audio/video |
AV mode | cable | |
|
| |
| Another recorder | |
| Player |
|
You can use your unit as the source player or as the recording deck.
Slide the TV/VCR/DVD switch to the right.
A Make connections.
AWhen using your unit as the source player ...
... connect its AUDIO/VIDEO OUTPUT connectors to the audio/video input connectors on another recorder.
BWhen using your unit as the recording deck ...
... connect its AUDIO/VIDEO input connectors to the audio/video output connectors on another recorder.
B Select the VCR deck.
On the unit
Press VCR/DVD repeatedly so that the VCR indicator lights up.
On the Remote
Press VCR so that the VCR indicator lights up.
C Set the input mode of recording deck.
With this video unit, press AUX (number key “0”) and/or CH to select
●When using another recorder as the recording deck, refer to its instruction manual.
D Set the edit mode.
See “PICTURE CONTROL” on page 75.
E Engage the Record Pause mode of the recording deck.
Locate the point where you start recording, then engage the Record Pause mode.
F Start the source player.
Engage the Play mode of the source player.
G Start the recording deck.
Engage the Record mode of the recording deck.
NOTES:
●All necessary cables can be obtained from your dealer.
●When you select “EDIT” to dub tapes in step D, be sure to select “NORM” after you finish dubbing the tapes.
●When you use this unit as the source player for editing, be sure to set “SUPERIMPOSE” to “OFF” before starting. ( pg. 75)