JVC HR-XVC26U manual 78 EN, Picture Settings, Audio Settings

78 EN SUBSIDIARY SETTINGS (cont.)

Picture Settings

* The default setting is bold in the table below.

8 MONITOR TYPE	You can select the monitor type depending the TV used when you play back
16:9	DVD VIDEO discs recorded for wide-screen TVs. For more details, refer to
4:3 LB	“Monitor Set (DVD deck)” ( pg. 18)
4:3 PS
8 PICTURE SOURCE	You can obtain optimal picture quality by selecting whether the content on the
AUTO	disc is processed by field (video source) or by frame (film source).
FILM	Normally set to “AUTO”.
VIDEO	AUTO:	Used to play back a disc containing both video and film
		source materials. This unit recognizes the picture type (film or
		video source) of the current disc according to the disc
	FILM:	information.
		Suitable for playing back a film or progressive source disc.
	VIDEO:	Suitable for playing back a video source disc with relatively a
		few moments.
	● If the playback picture is unclear or noisy, or the oblique lines of the picture
	are rough, try to change to other modes.
8 SCREEN SAVER	The TV screen may be burned out if a static picture is displayed for a long time.
ON	When this function is set to “ON”, the unit automatically activates the screen
OFF	saver function if a static picture, such as an on-screen display or menu is
	displayed for over 5 minutes.
8 FILE TYPE	You can select files to play back, when both MP3 files and JPEG files are
AUDIO	recorded on a disc.
STILL PICTURE	AUDIO:	Select this to play back MP3 files.
	STILL PICTURE: Select this to play back JPEG files.

Audio Settings

* The default setting is bold in the table below.

8DIGITAL AUDIO OUTPUT

PCM ONLY

DOLBY DIGITAL/PCM

STREAM/PCM

Set to the appropriate mode according to the type of the device connected to DIGITAL AUDIO OUT connector on the rear of unit.

It is not necessary to set this mode when you connect no device to DIGITAL AUDIO OUT connector.

PCM ONLY:

Select this when you connect the unit’s DIGITAL AUDIO OUT connector to the linear PCM digital input connector of other audio device.

DOLBY DIGITAL/PCM:

Select this when you connect the unit’s DIGITAL AUDIO OUT connector to the digital input connector of a Dolby Digital decoder or an amplifier with a built-in Dolby Digital decoder.

STREAM/PCM:

Select this when you connect the unit’s DIGITAL AUDIO OUT connector to the digital input connector of an amplifier with a built- in DTS, Dolby Digital, or MPEG multichannel decoder.