Hints for test institutes
Testing in accordance with EN 60704 must be carried out with appliance fully loaded and us- ing the test programme (see "Consumption values").
Test in accordance with EN 50242 must be carried out when the salt container and rinse
aid dispenser have been filled with salt and rinse aid respectively and using the test pro- gramme (see "Consumption values").
Full load: 12 standard place settings
Amount of detergent required
Rinse aid setting
5 g + 25 g (Type B)
position 4 (Type III)
Upper basket | Cutlery basket | Lower basket |
(take off the glass holder) |
|
|
Installation
WARNING!
Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or compe- tent person.
Fitting under a counter
IMPORTANT!
Carefully follow the instructions on the enclosed template for building in the dishwasher and fit- ting the furniture panel.
WARNING!
The dishwasher must be secured against tilting. Therefore make sure that the counter it is fixed under, is suitably secured to a fixed structure (adjacent kitchen units cabinets, wall).
24
