NEC ND-70919 system manual Switch Name Setting Function Check Number Position

CHAPTER 4 CIRCUIT CARD INFORMATION

PN-2ILCA (ILC)

Switch Settings

SWITCH NAME	SWITCH	SETTING		FUNCTION	CHECK
	NUMBER	POSITION
SW1	1	OFF	Always set to OFF.
(Piano Key SW)
OFF	2	OFF	Always set to OFF.
4
3	3	OFF	Always set to OFF.
2
1
ON	4	OFF	Always set to OFF.
SW0		ON	No. 0	Terminating register is
(Piano Key SW)			Circuit	provided.
	1
			(Receiving)	Terminating register is
OFF		OFF
				not provided.
4
			No. 0	Terminating register is
3		ON
2			Circuit	provided.
	2
1			(Sending)	Terminating register is
		OFF
ON
				not provided.
		ON	No. 1	Terminating register is
			Circuit	provided.
	3
			(Receiving)	Terminating register is
		OFF
				not provided.
		ON	No. 1	Terminating register is
			Circuit	provided.
	4
			(Sending)	Terminating register is
		OFF
				not provided.

The figure in the SWITCH NAME column and the position in in the SETTING POSITION column indicate the standard setting of the switch. When the switch is not set as shown by the

figure and , the setting of the switch varies with the system concerned.

Page 188	NEAX2000 IVS2 ISDN System Manual
	ND-70919 (E), Issue 1.0