Adjusting the Menu Settings
Partial Scan Channels
You can partially scan for network signal within a specified range of channels.
1Press MENU.
2 | Press | or | to select “Partial Channel Scan”, then press or OK. |
3 | Press | or | to select “Scan Mode”, then press or OK. |
4Press 
or 
to select an option, then press OK.
| t “Analog/Digital”: scan for both analog and digital channels | ||
| t “Analog”: scan for analog channels | ||
| t “Digital”: scan for digital channels | ||
5 | Press | or | to select “From Channel”, then enter a starting channel range. |
6 | Press | or | to select “To Channel”, then enter an ending channel range. |
7 | Press | or | to select “Start Scan”, then press OK. |
Scanning progress is displayed on the menu screen. To stop scan, select “Stop Scan” and press OK.
Add Channel
New channels may be added to your area periodically. Use the Add Channel function to add new channels.
1Press MENU.
2 | Press | or | to select “Channel”, then press or OK. |
3 | Press | or | to select “Find Channel”, then press or OK. |
4 | Press | or | to select “Enter Channel”, then enter a channel. |
5Press 
to select “Add Channel”, then press OK. Added channels are listed on the Channel List screen.
Delete Channel
To remove a channel from the Channel List screen.
1Press MENU.
2 | Press | or | to select “Channel”, then press or OK. |
3 | Press | or | to select “Channel Management”, then press or OK. |
4Press 
or 
, then press OK to mark the channels that you want to remove from the Channel List.
5Press RETURN to close the menu screen.
Sleep Timer
Sleep timer sets the TV to automatically turn off after a preset amount of time. See page 21.
ENGLISH
33
