56 EN

Power Switch

MEMORY PLAY Button

To DV

To

IN/OUT

USB

Core filter

DV cable

USB cable

(optional)

(provided)

Core filter

OR

To DV

To USB

connector

connector

PC with DV connector

USB-equipped PC

CONNECTIONS Advanced ConnectionsConnection To A Personal Computer

This camcorder can transfer still images to a PC via DV or USB connection as shown in the illustration.

1 Make sure the camcorder and PC are turned off.

2 Connect the camcorder to your PC using the appropriate cable as shown in the illustration.

3 Turn the camcorder’s Power Switch to “” while pressing down the Lock Button located on the switch and turn on the PC.

If you have connected via the USB cable. . . go to step 4.4 Press MEMORY PLAY.•“USB MODE ACCESSING FILE” appears on the LCD monitor.

•If the PC connected to the camcorder via the USB cable is not powered, the camcorder does not enter the USB mode.

5 When finished, turn off the PC first, then the camcorder.

NOTES:

●It is recommended to use the AC Power Adapter/

Charger as the power supply instead of the battery pack ( pg. 9).

●Never connect the USB cable and the DV cable simultaneously to the camcorder. Connect only the cable you wish to use to the camcorder.

●The date/time information cannot be captured into the PC.●Refer to the instruction manuals of the PC and provided Software.

●The still images can also be transferred to a PC with a DV connector-equipped capture board.

●When using a DV cable, be sure to use the optional JVC VC-VDV206U or VC-VDV204U DV cable depending on the type of DV connector (4 or 6 pins) on the PC, or use the DV cable provided with the capture board.

Never disconnect the USB cable while “ACCESSING FILE” is displayed on the LCD monitor since this can result in product damage.