Rotate the MENU wheel to select “1RETURN” and press it twice. The normal playback screen resumes.

60 EN

Power Switch

SNAPSHOT

Button

Lock Button

COPY – OF F

ON

Play/Pause Button (4/6)

MENU Wheel

Display

SP 46

DUBBING (cont.)Dubbing Images Recorded On A Tape To A Memory CardImages can be dubbed from a tape to a memory card.1 Load a memory card ( pg. 13) and cassette ( pg. 12).

2 Set the Power Switch to “” while pressing down the Lock Button. Open the LCD monitor fully or pull out the viewfinder fully.

3 Press the MENU wheel. The Menu Screen appears. Rotate it to select “ VIDEO” and press it. The VIDEO Menu appears.

4 Rotate the MENU wheel to select “ COPY” and press it. The Sub Menu appears. Rotate it to select “ON” and press it. Selection is complete.

5

6 To select a video image to be dubbed, start playback by pressing 4/6. At the moment you find the image you wish to dub, press it again to engage Still Playback.

7 To start dubbing, press SNAPSHOT. The selected image is stored in the memory card.

•“” blinks during dubbing.

NOTES:

If SNAPSHOT is pressed in step 7 when a memory card is not loaded, the message “COPYING FAILED” is displayed.

If an image recorded on the tape using the WIDE mode ( pg. 30) is dubbed to a memory card, the WIDE mode identifying signal is not dubbed with it.

To use Playback Special Effects with a video image you

wish to dub, perform up to step 7 using the remote control (provided) ( pg. 64).

Images are dubbed in VGA file size.