EN87

Warning Indications
IndicationsFunction

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Displays the battery remaining power.

 

 

 

 

 

 

 

 

 

Remaining power level: high

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Remaining power level: exhausted

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

As the battery power comes close to nil, the battery indicator

 

blinks.

 

 

 

 

 

 

 

When the battery power is exhausted, power turns off automatically.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Appears when no tape is loaded.( pg. 12)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CHECK TAPE’S ERASE

Appears when the erase protection tab is set to “SAVE” while the Power

PROTECTION TAB

Switch is set to “ ” or “ ”.

( pg. 12)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Appears if dirt is detected on the heads during recording. Use an optional

HEAD CLEANINGcleaning cassette.( pg. 90)

 

 

 

 

 

 

REQUIRED USE

 

 

 

 

 

 

CLEANING CASSETTE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Appears if condensation occurs. When this indication is displayed, wait

CONDENSATIONmore than 1 hour until condensation disappears.

 

 

 

 

 

 

 

 

OPERATION PAUSED

 

 

 

 

 

 

PLEASE WAIT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TAPE!

Appears if a tape is not loaded when the Recording Start/Stop Button is

pressed while the Power Switch is set to “ ” or “ ” and the Shooting

 

 

 

 

 

 

 

Mode Switch is set to “VIDEO”.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TAPE END

Appears when the tape ends during recording or playback.

( pg. 19)

 

 

 

 

 

 

 

 

 

 

 

 

 

DIFFERENTAppears if a tape in another format is loaded.

 

 

FORMATTED TAPE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SET DATE/TIME!Appears when the date/time is not set.(pg. 11)

Appears when the built-in clock (lithium) battery is discharged and the

 

 

 

 

 

 

 

previously set date/time is erased.

(pg. 11)

 

 

 

 

 

 

 

 

 

 

 

 

A. DUB ERROR!

Appears if Audio Dubbing is attempted on a blank portion of a tape.

 

 

 

 

( pg. 71)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A. DUB ERROR!

Appears if Audio Dubbing is attempted on a tape recorded in the LP

<CANNOT DUBmode.

( pg. 71)

ON A LP RECORDED

Appears if Audio Dubbing is attempted on a tape recorded in 16-bit

TAPE>
audio.

( pg. 71)

<CANNOT DUB

Appears if A. DUB (e) on the remote control is pressed when the erase

ON A 16BIT
protection tab is set to “SAVE”.

( pg. 71)

RECORDING>
<CHECK TAPE’S ERASE

 

 

 

 

 

 

PROTECTION TAB>

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

INSERT ERROR!

Appears if Insert Editing is attempted on a blank portion of a tape.

 

 

 

 

( pg. 72)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CONTINUED ON NEXT PAGE