JVC JY-VS200 66 EN, •Date/Time, •Time Code, MAKE CONNECTIONS, Screen ( pg. 41), Menu Screen (pg. 41), Also refer to pg. 54 and, *Connect when an S-Videocable is not used

66 EN USING THE REMOTE CONTROL UNIT (cont.)

		To AV
Connector
cover**
To EDIT	To
	S-VIDEO
		Audio/Video
		cable
Editing	S-Video	(provided)
cable	cable
(provided)	(provided)
		White to
		AUDIO L IN
To	Yellow to	Red to
S-VIDEO IN	VIDEO	AUDIO R
	IN*	IN
To Remote
PAUSE or
R.A.EDIT	VCR

To PAUSE IN

TV

DISPLAY

MAKE CONNECTIONSAlso refer to pg. 54 and 55.1 A JVC VCR equipped with a remote pause connector . . .... connect the editing cable to the Remote PAUSE connector.

A JVC VCR not equipped with a remote pause connector but equipped with an R.A.EDIT connector . . .

... connect the editing cable to the R.A.EDIT connector. A VCR other than above . . .... connect the editing cable to the remote control’s PAUSE IN connector.2 Insert a recorded tape into the camcorder and set thePower Switch to “ ” while pressing down the Lock Button located on the switch.

3 Turn the VCR power on, insert a recordable tape and engage the AUX mode (refer to the VCR’s instructions).

NOTES:

●Before Random Assemble Editing, make sure the indications do not appear on the TV monitor. If they do, they will be recorded onto the new tape.

To choose whether or not the following displays appear on the connected TV . . .

•Date/Time.... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in theMenu Screen (pg. 41).•Time Code.... set “TIME CODE” to “ON” or “OFF” in the MenuScreen ( pg. 41).•Playback Sound Mode, Tape Speed And Tape Running Displays

.... set “ON SCREEN” to “LCD” or “LCD/TV” in the Menu Screen (pg. 41). Or, press DISPLAY on the remote control.

●When editing on a VCR equipped with a DV input connector, an optional DV cable can be connected instead of an S-Video cable and audio/video cable.

*Connect when an S-Video cable is not used.**When connecting cables, open this cover.