JVC K3-R specifications Telnet and Serial Port, Setup Exit

K3 1RU AB Switch Page 14

A logout button is provided. Click this button to be instantly logged out. There is an automatic logout function if there is no activity for two minutes. You can also just close the browser; however you will not be able to log back in for two minutes.

Telnet and Serial Port

The menu system of the C-AB-16-R is the same for Telnet and direct serial access. For Telnet: Enter the IP address of the C-AB-16-Rinto your Telnet application program For Serial Direct Terminal Connection: press the Enter Key

For Serial Connection via Dial-up Modem: Establish the dial link, then press the Enter Key. After entering the correct password, the main screen is displayed

K-16	Set Location
1.	New York 1	A
2.	New York 2	B
3.	Philadelphia	A
4.	Baltimore	A
5.	Atlanta	A
6.	Charlotte	A
7.	Tampa	A
8.	Chicago	A
9.	Cleveland	A
10.	St. Louis	A
11.	Minneapolis	A
12.	Dallas	A
13.	Seattle	A
14.	Portland	A
15.	San Francisco	A
16.	Los Angeles	A

1-16. Operate Switch

A. All to 'A'	B. All to 'B'
S. Setup	X. Exit
K-16>

The screen shows all enabled cards and their current position A or B

Enter any card number 1-3 to operate that card; A or B to switch all cards to that position. Enter S to access the setup menus (see section 3.2.5 for setup details)

Enter X to logout of Telnet.

Card slots that have been disabled will not report any status.

NOTE: Only the 1st three AB card slot positions of the 16 displayed are used in the K3. Displayed Slots 4 thru 16 are non functional.