e_ka250.book Page 13 Tuesday, September 5, 2006 4:10 PM
Operation
1.Turn the RM-P210 on.
Turn the [POWER] switch of the camera remote control unit to [ON]. CALL button lights up green when the power is turned on. After the [POWER] switch is turned on, cam- era remote control unit can be operated after about 30 seconds.
MEMO
After the power is turned on, the camera remote control unit takes about 30 seconds to be ready to communicate with this unit.
2.Press the [CALL] button.
Press and hold down the [CALL] to send call signals to the remote control unit operator. The [TALLY] button indi- cator of the remote control unit blinks.
[CALL] button indicator changes from green to red while the button is pressed. The [TALLY] lamp on the view- finder also blinks when call signals are received from the remote control unit.
3.Adjust the volume.
Adjust the headset reception volume with [INCOM LEVEL].
MEMO
•If both this unit (including the camera) and the remote control unit have the same functional switches, the remote control unit switches are prioritized.
•If local Remote Control Unit
•If external synchronization signal is present when the power is turned on, pictures may appear choppy for a few seconds. This is not a malfunction.
•When using the remote control unit, refer to its instruc- tion manual for details.
INCOM LEVEL volume
CALL button
13
