Connecting IEEE1394

There are 2 ways to connect the IEEE1394.

Connecting via IEEE1394 Cable

●Connect the IEEE1394 cable to the KA-UM100G adapter and the IEEE1394 terminal of the camcorder.

●Set the [INT/EXT] switch to AEXTB.

[INT/EXT] switch

KA-UM100G adapter

IEEE1394 cable

Memo:

●When the switch is set to [INT], signal input and output is disabled.

●For information on where to purchase an IEEE1394 cable, please consult our authorized dealers.

Connection via Internal Wiring

Changes need to be made to the internal wire connections of the camcorder.

Memo:

●When making a connection with the switch set to [INT], it is necessary to alter the internal wire connections of the camcorder. For details, please consult our authorized dealers.

●When making a connection with internal wiring, the IEEE1394 terminal of the adapter is disabled.

[INT/EXT]

Description

Switch

 

 

 

 

● For recording data to or playing data from the

INT

SxS memory card.

● When the switch is set to [INT], the IEEE1394

 

 

terminal on the camcorder is disabled.

 

 

 

● For connecting the IEEE1394 terminal on the

 

camcorder to a computer or other devices.

EXT

● When the switch is set to [EXT], the internal

 

connection between the memory recorder

 

and the camcorder is disabled.

Turning On/Off the Power

Turning On the Power

1 Set the [POWER] switch of the camcorder to “On”

2 Press and hold down the [POWER] button of the memory recorder for at least one second

●The power of the memory recorder turns on. After a message indicating AKA-MR100 POWER ONB appears on the LCD panel for several seconds, the status screen is displayed.

Memo:

●It is necessary to set the built-in clock immediately after purchasing this product or when it has not been used for a prolonged period of time (three months or longer). After the power of the memory recorder turns on, a message indicating ACLOCK SETUP MENUB appears for several seconds. Next, the [CLOCK1] setting screen is automatically displayed. ASetting the Date/TimeB (A Page 7)

Turning Off the Power

1 Press and hold down the [POWER] button of the memory recorder for at least one second

●The power of the memory recorder turns off.

Memo:

●You can turn off the power of the memory recorder using the [POWER] switch of the camcorder by setting [DR- HD100 A.OFF] on the OTHERS[2/2] menu screen of the GY-HD200/HD250 series camcorder to AOnB.

Note:

●Make use of a battery to supply power to the memory recorder. Power cannot be supplied from the DC INPUT terminal of the camcorder.

Setting the Date/Time

Set the time of the built-in clock on the [CLOCK1] setting screen of the menu screen.

 

[PLAY/STILL]

[PREV] button

button

 

[FWD] button

[REV] button

[STOP] button

 

 

[NEXT] button

<[CLOCK1] Setting Screen>

<Buttons to use>

1Select the item to set (ATIME ZONEB, ADATEB or

ATIMEB)

●Press the [PREV] or [NEXT] button to select an item.

●After making a selection, press the [PLAY/STILL] or [FWD] button to confirm.

2Set the respective items

Set the items listed in the table below.

Memo:

●Be sure to set the ATIME ZONEB before setting the ADATEB and ATIMEB”.

●The memory recorder does not support daylight savings time.

Item

Description

 

 

 

For setting the time difference with the

 

UTC (Universal Time Coordinate). The

 

values of the ADATEB and ATIMEB items

TIME ZONE

will be automatically adjusted when this

 

item is altered.

 

AUTC Time Difference Chart by RegionB

 

(A Page 17)

 

 

DATE

For setting the date (month/day/year).

 

 

TIME

For setting the time (hour:minute:second).

 

 

●Press the [PREV] or [NEXT] button to select a value, followed by using the [PLAY/STILL] button to confirm the selection.

●When setting DATE, press the [FWD] or [REV] button to jump between month, day, and year. When setting TIME, press the same button to jump between hour, minute and second.

3Press the [MENU] button to return to the status screen

7