JVC KA-MR100G Attaching the Memory Recorder to a Camcorder, Setup

Setup

Attaching the Memory Recorder to a Camcorder

Check the IEEE1394 connection method before attaching the memory recorder to the camcorder.

For details, please refer to AConnecting IEEE1394B (A Page 7)

Note:

●The KA-MR100G adapter (sold separately) is required to attach the memory recorder to a camcorder.

Memo:

●Two different types of battery adapters, manufactured by IDX and Anton Bauer respectively, are available, depending on the country/region where the camcorder is purchased.

1 Remove the battery from the camcorder

2 Remove the battery adapter from the camcorder

Follow the steps illustrated in A _ C below to remove the battery adapter, followed by the plate (for IDX adapters only) and rubber sheet from the camcorder.

Rubber sheet

(included with the camcorder)	Battery adapter
C Remove screw B (x4)		Screw A	A Remove screw A
			(x4)
Screw B
			Screw
			A

4 Attach the memory recorder to the KA-UM100G adapter

Align the screw holes at the back of the KA-UM100G adapter with the holes on the rubber sheet. Next, follow the steps illustrated in A _ D to attach the memory recorder.

	B Set the hook to the guide
	Hook	Memory recorder
KA-UM100G	Guide	(KA-UM100G)
adapter		Screws DMount the
		screws (x2)
		Connector B
		C Connect
		connector B
Recess	Connector A
Rubber sheet	A Connect
	connector A
(included with the

memory recorder)

Note:

●Store the connection wires and connectors properly so that they do not protrude from the groove or recess.

5 Attach the battery adapter to the memory recorder

Align the screw holes at the back of the memory recorder with the holes on the rubber sheet. Next, follow the steps illustrated in A _ C to attach the rubber sheet, plate (for IDX adapters only) and battery adapter.

Rubber sheet	Battery adapter
(included with the camcorder)	C Mount screw A (x4)

Plate (for IDX		Battery adapter
adapters only)	Connector
		for Anton Bauer

B Remove connector (x2)

Memo:

●Battery adapters manufactured by Anton Bauer do not come with a plate.

3Attach the KA-UM100G adapter (sold separately) to the camcorder

Align the screw holes at the back of the camcorder with the holes on the rubber sheet. Next, follow the steps illustrated in A _ B to attach the KA-UM100G adapter.

A Mount screw B (x4)

Screw B

Plate (for IDX
adapters only)	Connector
B Connect the connector (x2)
Note:

Screw A

Screw A

Battery adapter for Anton Bauer

Rubber sheet	KA-UM100G adapter
(included with KA-UM100G)
	Screws
	B Mount the
	screw (x4)
	Connector A Connect the
	connector (x2)
	Recess

Note:

●Store the connection wires and connectors properly so that they do not protrude from the groove or recess.

●Store the connection wires and connectors properly so that they do not protrude from the groove or recess.

Memo:

●Battery adapters manufactured by Anton Bauer do not come with a plate.

6 Attach the battery to the camcorder

Note:

●Do not use the battery that cannot be connected with this product.

For details, please refer to the instruction manual of the camcorder.

6