Using Bluetooth® devices

Bluetooth is a short-range wireless radio communication technology for the mobile device such as mobile phones, portable PCs, and other devices. The Bluetooth devices can be connected without cables and communicate with each other.

By connecting the supplied USB Bluetooth Adapter (KS-UBT1) to one of the USB input terminals of this unit, you can operate a Bluetooth device using this unit.

Once the USB Bluetooth Adapter is attached, this unit is always available for pairing.

•Only one USB Bluetooth Adapter can be detected at a time.

•KS-UBT1 is initially inserted to the rear USB cable of this unit.

•Refer also to the instructions supplied with the Bluetooth device.

•Refer to page 4 of the Installation/Connection Manual (separate volume) to check the countries where you may use the Bluetooth function.

This unit supports the following Bluetooth profiles

• HFP (Hands-Free Profile) 1.5

• A2DP (Advanced Audio Distribution Profile) 1.2

• OPP (Object Push Profile) 1.1

• AVRCP (Audio/Video Remote Control Profile) 1.3

• PBAP (Phonebook Access Profile) 1.0

 

Connecting a Bluetooth device

When you connect a Bluetooth device to the unit for the first time, make pairing between the unit and the device.

•Once the connection is established, it is registered in the unit even if you reset the unit. Up to five devices can be registered in total. “Pairing Full” appears if you try to pair the 6th device.

•This unit supports Secure Simple Pairing (SSP).

•Pairing sequence may be different from what is described on the following.

•A maximum of two devices for Bluetooth phone and one for Bluetooth audio can be connected at a time.

1

]Turns on the power.

2USB input terminal

or

 

KS-UBT1 (supplied)

USB cable from the

rear of the unit

 

]Make sure USB Bluetooth Adapter is connected to one of the USB input terminals.

12ENGLISH