Menu itemSelectable setting, [ Initial: Underlined ]

 

 

Connect Phone*1/

Turn the control dial to select a device you want to connect. “Connected [Device Name]”

Connect Audio

appears on the display when the device is connected.

 

 

Disconnect Phone/

Turn the control dial to select a device you want to disconnect. “Disconnected

Disconnect Audio

[Device Name]” appears on the display when the device is disconnected.

 

 

Delete Pairing

Turn the control dial to select the device you want to delete, then press the control dial to

 

confirm. (page 13)

 

 

Phonebook Trans

You can copy the phonebook memory of a mobile phone into the unit (via OPP). You may

 

need to enter the PIN code or verify passkey from the mobile phone to do pairing. You can

 

transfer a maximum of 400 numbers.

 

 

Set PIN Code

You can change the PIN code of your choice before pairing (1-digit to 6-digit number).

 

[ Initial: 0000 ]

 

Turn the control dial to select a number, press 4 /¢ to move to the entry

 

position, then press the control dial to confirm the entry.

 

 

Auto Connect

On : The connection is established automatically with the registered Bluetooth device when

 

you turn on the unit. / Off : The unit does not connect the Bluetooth device automatically.

 

Use <Connect Phone/ Connect Audio> to connect.

 

 

Initialize

Yes : Initialize all the Bluetooth settings (including stored pairing, phonebook, and etc.). /

 

No : Cancels.

 

 

Information

My BT Name : Shows the unit name (JVC Unit). / My Address : Shows address of

 

USB Bluetooth Adapter. / ConnectedPhone*2 : Shows connected phone name. /

 

ConnectedAudio*2 : Shows connected audio device name.

*1 Will not display if two Bluetooth phones are connected at the same time. *2 Displayed only when a Bluetooth phone/audio player is connected.

Listening to an iPod/iPhone

You can connect an Apple iPod/iPhone using the USB 2.0 cable (accessory of the iPod/iPhone) to the USB input terminal on the control panel or USB cable from the rear of the unit.

~

Ÿ

USB input terminal

 

 

] Turns on the power.

 

 

 

 

Apple iPod/iPhone

 

 

and/or

 

 

USB cable from the

 

 

rear of the unit

 

 

USB 2.0 cable (accessory

Playback starts automatically.

 

of the iPod/iPhone)

 

 

18ENGLISH