Bluetooth
iPod/iPhone playback
| Symptom | Remedy/Cause |
| Phone sound quality is poor. | Reduce the distance between the unit and the Bluetooth mobile |
| ||
|
| phone. / Move the car to a place where you can get a better signal |
|
| reception. |
|
|
|
| The unit does not response when you | You may have tried to copy the same entries (as stored) to the |
| tried to copy the phonebook to the unit. | unit. Press DISP or BACK to exit. |
|
|
|
| The sound is interrupted or skipped | Reduce the distance between the unit and the Bluetooth audio |
| during playback of a Bluetooth audio | player. / Disconnect the device connected for Bluetooth Phone. / |
| player. | Turn off, then turn on the unit. / Connect the player again, when |
|
| the sound is not yet restored. |
|
|
|
| The connected audio player cannot be | Check whether the connected audio player supports AVRCP |
| controlled. | (Audio/Video Remote Control Profile). (Operations depend on the |
|
| connected audio player.) / Disconnect and connect the Bluetooth |
|
| player again. |
|
|
|
| “Voice” calling method is not successful. | Use “Voice” calling method in a more quiet environment. / Reduce |
|
| the distance from the microphone when you speak the name. / |
|
| Change the “NR/EC Mode” to “Off” (page 15), then try again. |
|
|
|
| “Please Connect BT Adapter” appears on | Connect the USB Bluetooth Adapter to the unit before you can |
| the display. | perform any operation. |
|
|
|
| “Connection Error” appears on the | The device is registered but the connection has failed. Use |
| display. | <Connect Phone/ Connect Audio> to connect the device again. |
|
|
|
| “Error” appears on the display. | Try the operation again. If “Error” appears again, check if the |
|
| device supports the function you have tried. |
|
|
|
| “Please Wait...” appears on the display. | The unit is preparing to use the Bluetooth function. If the message |
|
| does not disappear, turn off and turn on the unit, then connect the |
|
| device again (or reset the unit). (page 3). |
|
|
|
| “HW Error” appears on the display. | Reset the unit and try the operation again. If “HW Error” appears |
|
| again, consult your nearest JVC car audio dealer. |
| The iPod does not turn on or does not | Check the connecting cable and its connection. / Charge the |
| work. | battery of the iPod/iPhone. / Reset the iPod/iPhone. / Check |
|
| whether <iPod Switch> setting is appropriate. (page 33) |
|
|
|
| The sound is distorted. | Deactivate the equalizer on the iPod/iPhone. |
|
|
|
| Noise is generated. | Turn off (uncheck) the “VoiceOver” feature of the iPod. For details, |
|
| visit <http://www.apple.com>. |
|
|
|
| Playback stops. | The headphones are disconnected during playback. Restart the |
|
| playback operation. (page 18) |
|
|
|
36ENGLISH