
Setting the crossover High/Low Pass Filter—X’over HPF/LPF
1 | 3 Press 5/∞ to select the |
[Hold] | measurement unit [ cm/ inch ]. |
2 | 4 Press the control dial to confirm the |
settings. | |
| |
| If “Pro” is selected in step 3... |
| HPF/LPF |
] <Audio> ] <X’over HPF/LPF> | Front |
HPF Off | |
X’over HPF/LPF | |
|
Easy
Pro1 Press 4 / ¢
to select the speaker [ Front/ Rear/ Subwoofer * ].
3
]Select the adjustment method [ Easy/ Pro ].
4If “Easy” is selected in step 3...
HPF/LPF
Front Full
cm/inch
1Press 4 / ¢
to select the
*Displayed only when <On> is selected for <Subwoofer On/Off>. (page 32)
2Turn the control dial to select the speaker size.
Front/ Rear :Full [ Initial ]/ 4” (10cm)/
4x6” (10x15cm)/ 5x7” (13x18cm)/ 6x8” (15x20cm)/ 6x9” (15x23cm)/ 7x10” (18x25cm)
*Displayed only when <On> is selected for <Subwoofer On/Off>. (page 32)
2Turn the control dial to select the cut off frequency.
Front/ Rear :
HPF 30Hz — HPF 200Hz : Activates the High Pass Filter (HPF). Frequencies lower than the selected frequency are cut off from the front/rear speakers. HPF Off [ Initial ] : Deactivates HPF (all signals are sent to the front/rear speakers).
Subwoofer :LPF 30Hz — LPF 200Hz :[Initial: LPF 80Hz ] : Activates the Low Pass Filter (LPF). Frequencies lower than the selected frequency are sent to the subwoofer.
LPF Off : Deactivates LPF (all signals are sent to the front/rear speakers).
3Press 5/∞ to select the quality of HPF/LPF [
Subwoofer :
Full /
[ Initial:
Front/ Rear :4Press the control dial to confirm the settings.
ENGLISH 29