JVC KD-ABT22 Adjusting the sound, Loudness, D VolAdjust, [–5to +5], 4 Exit from the setting, A Fad/Bal (Fader/Balance), C Hi Pass (Hi Pass Filter)

		Adjusting the sound						3 Turn the control dial to adjust the
									subwoofer output level. [0 to 8]
You can adjust the sound characteristics to your
								4 Press number button 1 (			) to
preference.
									move to another setting level.
• When					is shown on the display, you can
									4	/¢ : select the quality of
	move back to the previous screen by pressing number
									LPF. [–12dB/oct or –24dB/oct]
	button 3 or 6.
									Control dial: Turn the control dial to select
1
									the subwoofer phase. [0deg (normal) or
									180deg (reverse)]
2								* If “Off” is selected in step 2, you can only
									adjust the subwoofer phase.
								C Hi Pass (Hi Pass Filter)
								Turn the control dial to select the cutoff
								frequency to the front/rear speakers. Set this
								to match the LPF setting.
	• For “EQ” setting, see page 28.							•	Off:	All signals are sent to the front/rear
										speakers.
3 Adjust the selected setting item.								•	62Hz:	Frequencies lower than 62 Hz are
										cut off.
		A Fad/Bal (Fader/Balance)
								•	95Hz:	Frequencies lower than 95 Hz are
1			Press number button 1 (				)
										cut off.
			to move to the “Fad/Bal” adjustment
								• 135Hz: Frequencies lower than 135 Hz are
			display.
										cut off.
2			Adjust the speaker output balance by
								D VolAdjust, [–5 to +5]
			pressing:
								Turn the control dial to adjust the input level
			5/ ∞: between the front and rear
								of each source (except FM).
			speakers. [F6 to R6]
								Adjust to match the input level of the FM
			4 /¢ : between the left and
								sound level.
			right speakers. [L6 to R6]
								• Before making an adjustment, select the
		B Subwoofer
									source you want to adjust.
1			Press number button 1 (				) to
								E Loudness, [Off or On]
			move to the “Subwoofer” adjustment
								Turn the control dial to select “Off” or
			display.
								“On.” When “On” is selected, low and high
2			Use 4 /¢ to select the cutoff
								frequencies sound are boosted to produce a
			frequency to the subwoofer.
								well-balanced sound at low volume level.
			•	Off*:		All signals are sent to the
						subwoofer.		4 Exit from the setting.
			•	55Hz:		Frequencies higher than 55 Hz
						are cut off.
			•	85Hz: Frequencies higher than 85 Hz
						are cut off.

•120Hz: Frequencies higher than 120 Hz are cut off.

ENGLISH

SETTINGS 29