3Select a source.

All Source*1 ÔCD ÔChanger*3 (or Ext In*2) ÔUSB*3 ÔFM ÔAM Ô Sirius*3/XM*3 ÔiPod*3 ÔAux In Ô BT Audio Ô(back to the beginning)

*1 When you select “All Source,” you can use the same color for all the sources.

*2 Depends on the “Ext Input” setting, see page 33. *3 Displayed only when the target component is

connected.

4Select a color.

Pale ÔAqua ÔSky ÔSea ÔLeaves ÔGrass ÔApple ÔRose ÔAmber Ô Honey ÔViolet ÔGrape ÔEvery*4 Ô User*5 Ô(back to the beginning)

*4 The color changes every 2 seconds.

*5 The user-edited colors—“Day Color” and “NightColor” will be applied (see the right column for details).

5Repeat steps 3 and 4 to select the color for each source (except when selecting “All Source” in step 3).

6Exit from the setting.
Creating your own color—User Color

You can create your own colors—“Day Color” or

ENGLISH

“NightColor.”

 

1

Follow steps 1 to 3 on page 31.

 

 

• In step 2, select “COLOR.”

 

 

• In step 3, select “Color Set.”

 

2

Select “Day Color” or “NightColor.”

 

3Select a primary color.4Adjust the level (00 to 11) of the selected primary color.5Repeat steps 3 and 4 to adjust other primary colors.

6Exit from the setting.

SETTINGS 35