JVC KD-ADV7490, KD-DV7400 Selecting a preset sound mode, USER, ROCK, POPS, JAZZ, CLASSIC, HIP HOP, B Subwoofer, Adjusting the sound

ENGLISH

Selecting a preset sound mode

You can select a preset sound mode suitable to the music genre (iEQ: intelligent equalizer).

1					Select “EQ.”
2					Select “On.”
					• If “Bypass” is selected, you can listen to the original
					sound mode recorded.				lights up on the
					display.
3					Select a preset sound mode.
Preset value setting for each sound mode
Sound mode					Preset value
			Band 1 (100 Hz)	Band 2 (320 Hz)	Band 3 (1 kHz)		Band 4 (3.2 kHz)			Band 5 (10 kHz)
USER			0	0	0			0			0
ROCK			+3	+2	0			+1			+1
CLASSIC			+2	+2	0			+1			0
POPS			0	+1	0			+1			+2
HIP HOP			+4	+1	–2			0			+1
JAZZ			+3	+2	+1			+2			+2
	Adjusting the sound				3 Adjust the selected setting item.
You can adjust the sound characteristics to your					A Fad/Bal (Fader/Balance)
					1 Press number button 1 (						)
preference.
					to move to the “Fad/Bal” adjustment
• When		is shown on the display, you can
					display.
move back to the previous screen by pressing number
					2 Adjust the speaker output balance by
button 3 or 6.
					pressing:
1
					5/ ∞: between the front and rear
					speakers. [F6 to R6]
2					4 /¢ : between the left and
					right speakers. [L6 to R6]
					B Subwoofer
					1 Press number button 1 (						) to
					move to the “Subwoofer” adjustment
• For “EQ” setting, see above.					display.
					2 Use 4 /¢ to select a cutoff
					frequency to the subwoofer.
					•	Off*: All signals are sent to the
							subwoofer.

42