JVC KD-ADV7490, KD-DV7400 Loudness, 2Select a sound mode, DVolAdjust, [–5to +5], 4Exit from the setting, 6Store the adjustments, CHi Pass (Hi Pass Filter)

•55Hz: Frequencies higher than 55 Hz are cut off.

•85Hz: Frequencies higher than 85 Hz are cut off.

•120Hz: Frequencies higher than 120 Hz

are cut off.

3Turn the control dial to adjust the subwoofer output level. [0 to 8]

4Press number button 1 () to move to another setting level.

4/¢: select the quality of LPF. [–12dB/oct or –24dB/oct]

Control dial: Turn the control dial to select the subwoofer phase. [0deg (normal) or 180deg (reverse)]

* If “Off” is selected in step 2, you can only adjust the subwoofer phase.

CHi Pass (Hi Pass Filter)

Turn the control dial to select the cutoff frequency to the front/rear speakers. Set this

to match the LPF setting.

• Off: All signals are sent to the front/rear speakers.

•62Hz: Frequencies lower than 62 Hz are cut off.

•95Hz: Frequencies lower than 95 Hz are cut off.

•135Hz: Frequencies lower than 135 Hz are cut off.

DVolAdjust, [–5 to +5]

Turn the control dial to adjust the input level of each source (except FM).

Adjust to match the input level of the FM sound level.

• Before making an adjustment, select the

source you want to adjust.

ELoudness, [Off or On]

Turn the control dial to select “Off” or “On.” When “On” is selected, low and high frequencies sound are boosted to produce a well-balanced sound at low volume level.

4Exit from the setting.

Storing your own sound modes

You can adjust the sound modes and store your own adjustments in memory.

•When is shown on the display, you can move back to the previous screen by pressing number button 6.

1

2Select a sound mode.

3Select a frequency range to adjust.

4Adjust the sound elements of the selected frequency range.

1 Press 4/¢ to select the frequency band, then press 5/ ∞to enhanced level for the selected frequency band. [–6 to +6]

2Press number button 5 (), then turn the control dial to select the frequency.

3Press number button 5 (), then turn the control dial to select the quality slope (Q).

5Repeat steps 3 and 4 to adjust the other frequency bands.

6Store the adjustments.

ENGLISH

SETTINGS 43