JVC KD-AR760, KD-G710 Adjusting the sound

18
ENGLISH
Adjusting the sound
You can adjust the sound characteristics to your
preference.
1
* Only for KD-AR760.
2
Indication pattern changes as you
adjust the fader or balance.
Ex.: When “FAD” is selected
Indication To do: Range
FAD*1
(fader)
Adjust the front
and rear speaker
balance.
R06 (Rear
only)
to
F06 (Front
only)
BAL
(balance)
Adjust the left
and right speaker
balance.
L06 (Left
only)
to
R06 (Right
only)
LOUD
(loudness)
Boost low and
high frequencies
to produce a well-
balanced sound at
low volume level.
LOUD ON
LOUD
OFF
WOOFER*2Adjust the
subwoofer output
level.
00 (min.)
to
08 (max.)
VOL*3
(volume)
Adjust the
volume.
00 (min.)
to
30 or 50
(max.)*4
*1 If you are using a two-speaker system, set
the fader level to “00.”
*2 Only for KD-AR760: This takes effect only
when a subwoofer is connected.
*3 Normally the control dial works as the
volume control. So you do not have to select
“VOL” to adjust the volume level.
*4 Depending on the amplifier gain control
setting. (See page 22 for details.)
EN18-23_KD-AR760_G710[J]f.indd 18 10/6/04, 4:15:58 PM