When an FM stereo broadcast is hard to receive

1

SOURCEMENU

2Select “MODE” menu.

OK

3Select “MONO”, then set it to “On”.

4Finish the procedure.

OK

Lights up when monaural mode is activated.

Reception improves, but stereo effect will be lost.

To restore the stereo effect, repeat the same

procedure to set “MONO” to “Off”. The MO indicator goes off.

To tune in strong-signal FM station only

In step 2 on the left column....

1Select “Lo/DX”, then set it to “Local”.

2Finish the procedure.

OK

Lights up when “Local” mode is activated.

Only stations with sufficient signal strength will be detected.

To tune in to all receivable stations, repeat the same procedure to set “Lo/DX” to “DX”. The LO indicator goes off and the DX indicator lights up.

ENGLISH

13