ENGLISH

•

If

lights up, TA Standby Reception is

 

listening to an FM station without the RDS

 

 

activated.

 

•

If

flashes, TA Standby Reception is not

yet activated. (This occurs when you are

signals required for TA Standby Reception.) To activate TA Standby Reception, tune in to another station (or DAB service) providing these signals. will stop flashing and remain lit.

To deactivate the TA Standby Reception

T/P

goes off.

PTY Standby Reception

PTY Standby Reception allows the receiver to switch temporarily to your favorite PTY programme from any source other than AM.

•If the DAB tuner is connected, Standby Reception also works to search for a DAB service.

To activate and select your favorite PTY code for PTY Standby Reception, see page 45.

either lights up or flashes.

• If lights up, PTY Standby Reception is activated.

• If flashes, PTY Standby Reception is not yet activated.

T/P

To activate PTY Standby Reception, tune in to another station (or DAB service) providing these signals. The PTY indicator will stop flashing and remain lit.

To deactivate the PTY Standby Reception,

select “OFF” on “PTY” in the “MODE” menu. goes off.

•See “When an FM stereo broadcast is hard to receive” on page 13 to see how to move into the “MODE” menu.

Tracking the same programme—Network-Tracking Reception

When driving in an area where FM reception is not sufficient enough, this receiver automatically tunes in to another FM RDS station of the same network, possibly broadcasting the same programme with stronger signals (see the illustration below).

When shipped from the factory, Network- Tracking Reception is activated ( lights up when the power is turned on for the first time).

To change the Network-Tracking Reception

setting, see “AF-Regn’l” on page 45.

Programme A broadcasting on different frequency areas (01 – 05)

18