Indications

Selectable settings, [reference page]

 

 

Amp Gain

You can change the maximum volume level of this receiver.

Amplifier gain control

High Power:[Initial]; VOL 00 – VOL 50

 

Low Power: VOL 00 – VOL 30 (Select this if the maximum power

 

 

of the speaker is less than 50 W to prevent them from

 

 

damaging the speaker.)

 

Off:

Deactivates the built-in amplifier.

 

 

AV INPUT

You can determine the use of LINE IN and VIDEO IN jacks on this

Audio-Video input

receiver.

 

Audio+Video: [Initial]; Select this when connecting an AV component such as a VCR.

Audio: Select this when connecting an audio component such as a cassette deck.

Camera*4: Select this when connecting the rear view camera. The rear view through the camera is automatically displayed on the monitor when you change the gear to the back position.

Camera Rev.*4: The mirror image of the rear view through the rear view camera is automatically displayed on the monitor when you change the gear to the back position. (The monitor on the unit only; the normal rear view appears on the external monitor.)

*4 Reverse gear signal connection is needed to change the monitor view automatically. See Installation/Connection Manual (separate volume).

ENGLISH

47