Playing a JPEG disc

•It is recommended that you record a file at 640 x 480 resolution. (If a file has been recorded at a resolution of more than 640 x 480, it will take a long time to be shown.)

•This System can play only baseline JPEG files. Progressive JPEG files or lossless JPEG files cannot be played.

Baseline JPEG format: Used for digital cameras, web, etc.

Progressive JPEG format: Used for web.

Lossless JPEG format: An old type and rarely used now.

•If progressive or lossless JPEG files are played back, a black screen appears. In this case, stop playback and select a baseline JPEG file. Note that it may take a long time to select another file.

Changing the source

•If you change the source, playback also stops (without ejecting the disc).

Next time you select “DISC” for the playback source (without activating Dual Zone), disc play starts automatically.

Ejecting a disc

•If the ejected disc is not removed within

15 seconds, the disc is automatically inserted again into the loading slot to prevent it from dust. (Disc will not play this time.)

DVD setup menu

•When the language you have selected is not recorded on a disc, the original language is automatically used as the initial language. In addition, for some discs, the initial languages settings will not work as you set due to their internal disc programming.

•While playing (or pausing), you cannot change these languages.

After you change any of these language settings, eject the disc and insert it (or another disc) again so that your setting takes effect.

•When you select “16:9” for a picture whose aspect ratio is 4:3, the picture slightly changes due to the process for converting the picture width.

•Even if “4:3PS [PAN SCAN]” is selected, the screen size may become

“4:3LB [LETTER BOX]” with some DVDs. This depends on how they are recorded.

General settings—PSM

•If you change the “Amp Gain” setting from “High Power” to “Low Power” while the volume level is set higher than “VOL 30”, the receiver automatically changes the volume level to “VOL 30”.

Other main functions

•If you try to assign a title to a 31st disc,

“Name Full” flashes on the monitor. Delete unwanted titles before assignment.

•Titles assigned to discs in the CD changer can also be shown if you play back the disc on the receiver.

DAB tuner operations

•PTY Standby Reception works for the DAB tuner only using a Dynamic PTY, but not a Static PTY.

•TA Standby Reception for FM RDS station and Road Traffic News Standby Reception for DAB cannot be set separately. The T/P button always work for the both Standby Reception modes when the DAB tuner is connected.

ENGLISH

63