BASIC OPERATIONS
1 3 2
Turning on the power
1 Turn on the power.
Note on
When you select a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power.
2 Select the source.
To operate the tuner (FM or AM), see pages 8 – 17.
To play a CD,
see pages 18 – 21. To play an MP3 disc,
see pages 23 – 26.
To operate the CD changer, see pages 34 – 37.
To operate the external component (LINE IN), see page 38.
To operate the DAB tuner, see pages 39 – 42.
Volume level appears.
Volume level indicator
4 Adjust the sound as you want. (See pages 27 and 28.)
To drop the volume in a moment
Press 
briefly while listening to any source. “ATT” starts flashing on the display, and the volume level will drop in a moment.
To resume the previous volume level, press the button briefly again.
•If you turn the control dial, you can also restore the sound.
To turn off the power
Press and hold 
for more than one second.
“SEE YOU” appears, then the unit turns off.
•If you turn off the power while listening to a disc, disc play will start from where playback has been stopped previously, next time you turn on the power.
3 Adjust the volume.
To increase the volume
To decrease the volume
CAUTION on Volume Setting:
Discs produce very little noise compared with other sources. If the volume level is adjusted for the tuner, for example, the speakers may be damaged by the sudden increase in the output level. Therefore, lower the volume before playing a disc and adjust it as required during playback.
5
