JVC KD-G502 Storing DAB services in memory, To tune in to a particular ensemble without searching

Models: KD-G502

1 50
Download 50 pages 36.44 Kb
Page 40
Image 40

3 Start searching for an ensemble.

To search for ensembles of higher frequency

To search for ensembles of lower frequency

When an ensemble is received, searching stops.

To stop searching before an ensemble is

received, press the same button you have

pressed for searching.

4 Select a service (either primary or secondary) you want to listen to.

To select the next service (If a primary service has some secondary services, they are selected before the next primary service is selected.)

To select the previous service (either primary or secondary)

To change the display information while tuning in to an ensemble

Normally service name is shown on the display. If you want to check the ensemble name or its frequency, press DISP (display) repeatedly.

Each time you press the button, the following information appears for a while on the display.

Service name

Ensemble name

Channel number

Frequency

Clock

To tune in to a particular ensemble without searching

Before you start....

Press FM/AM DAB briefly if CD, CD changer, or external component is the current source.

1Press and hold FM/AM DAB to select DAB tuner as the source.

2Press FM/AM DAB repeatedly to select the DAB band (DAB1, DAB2, or DAB3).

3Press and hold ¢ or 4 for more than one second.

4Press ¢ or 4 repeatedly until the ensemble you want is reached.

If you hold down the button, the frequency keeps changing until you release the button.

5Press 5 (up) or (down) to select a service (either primary or secondary) you want to listen to.

To restore the FM/AM tuner

Press and hold FM/AM DAB again.

Storing DAB services in memory

You can preset up to 6 DAB services in each DAB band (DAB1, DAB2, and DAB3) manually.

Before you start....

Press FM/AM DAB briefly if CD, CD changer, or external component is the current source.

1 Select the DAB tuner.

Each time you press and hold the button, the DAB tuner and the FM/AM tuner are alternately selected.

DAB FM/AM

2 Select the DAB band (DAB1, DAB2, or DAB3) you want.

Each time you press the

button, the DAB band

changes as follows:

DAB1 DAB2 DAB3

40

Page 40
Image 40
JVC KD-G502 manual Storing DAB services in memory, To tune in to a particular ensemble without searching