ENGLISH

Selecting preset sound modes (iEQ: intelligent equalizer)

You can select a preset sound mode (iEQ: intelligent equalizer) suitable to the music genre.

There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.

1 Press MODE to enter the functions mode.
To cancel the preset sound mode, select“FLAT” in step 3.

Notes:

You can adjust the preset sound modes temporarily. However, your temporary adjustments will be reset when you select another sound mode.

For details about the preset settings of each sound mode, see table on page 40.

For showing the iEQ pattern on the display during play, select “EQ & LEVEL” or “SILENT” for the level meter. See also page 28.

2 Press EQ (equalizer) while “MODE” is still on the display.The last selected sound mode is called up.3 Select the sound mode you want.As you turn the controldial, the sound modes change as follows:

FLAT OHARD ROCK OR&B O POP OJAZZ ODANCE MUSIC O COUNTRY OREGGAE OCLASSIC O USER 1 OUSER 2 OUSER 3 O

(back to the beginning)Indication pattern changes for each sound mode.Ex.: When you select “HARD ROCK”
When using the remote controller:Press SOUND repeatedly.

ATT SOUND

Each time you press the

Ubutton, the sound modes

R SOURCE F

Dchange as follows:USER 1,USER 2, USER 3

24