BASIC OPERATIONS

ENGLISH

1 3 2

Turning on the power

Volume level appears.

 

1 Turn on the power.Volume level indicator
Note on One-Touch Operation:

When you select a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power.

2 Select the source.To operate the tuner (FM or AM), see pages 10 – 12.To play a CD,see pages 13 – 16.To play an MP3/WMA disc, see pages 18 – 22.To operate the CD changer, see pages 34 – 38.To operate the external component (LINE IN), see page 39.
4 Adjust the sound as you want. (See pages 23 – 25.)To drop the volume in a moment

Press briefly while listening to any source. “ATT” starts flashing on the display, and the volume level will drop in a moment.

To resume the previous volume level, press the button briefly again.If you turn the control dial, you can also restore the sound.To turn off the powerPress and hold for more than one second.“SEE YOU” appears, then the unit turns off.

If you turn off the power while listening to a disc, disc play will start from where playback has been stopped previously, next time you turn on the power.

3 Adjust the volume.To increase the volumeTo decrease the volume
CAUTION on Volume Setting:

Discs produce very little noise compared with other sources. If the volume level is adjusted for the tuner, for example, the speakers may be damaged by the sudden increase in the output level. Therefore, lower the volume before playing a disc and adjust it as required during playback.

7