JVC KD-G805 adjustments, Storing your own sound, mode, FREQ, LEVEL, WIDTH, HI LEVEL, Indication, Preset values, FREQ (LOW, HI):, =MID LEVEL* =MID WIDTH

Storing your own sound	FREQ (LOW, HI):
adjustments	Select the center frequency to adjust.
	WIDTH (LOW, MID):
	Select the band width level.
You can adjust the sound modes to your	LEVEL (LOW, MID, HI):
preference and store your own adjustments in	Adjust the enhancement level.
memory (USER 1, USER 2 and USER 3).	* By pressing	¢or 4 , you can
• There is a time limit in doing the following	directly move as follows:
	LOW LEVEL		MID LEVEL
procedure. If the setting is canceled before you
finish, start from step 1 again.		HI LEVEL
1 Press MODE to enter the functions	5 Adjust the selected sound element.
mode.

ENGLISH

2 Press EQ (equalizer) while “MODE” is still on the display.

The last selected sound mode

is called up.

3 Select the sound mode you want to adjust.

Ex.: When you select “JAZZ”

4 Select sound elements to adjust.

Each time you press the button, the sound elements

change as follows:

LOW LEVEL* =LOW FREQ =LOW WIDTH=MID LEVEL* =MID WIDTH=HI (high) LEVEL* =HI (high) FREQ=(back to the beginning)

Indication		Preset values
	LOW			MID		HI
LEVEL	–06 (min.)		–06 (min.)		–06 (min.)
	+06 (max.)		+06 (max.)		+06 (max.)
FREQ.	60Hz				8kHz
	80Hz				10kHz
	100Hz				12kHz
	120Hz				15kHz
WIDTH	1 (min.)		1 (min.)
	4 (max.)		2 (max.)

6 Repeat steps 4 and 5 to adjust the other sound elements.7 Select one of the user sound modes (USER 1, USER 2, USER 3).8 Press EQ to store the adjustments.

“MEMORY” appears for a

while.

25