ENGLISH

4Operate the target Bluetooth device while “OPEN..” is flashing on the screen.

Enter the same PIN code (as entered in step 2) into the device to be connected.

Now the connection is established and you can use the device through the unit.

The device remains registered even after you disconnect it. Use “CONNECT” (or activate

“AUTO CNNCT”) to connect the same device from next time on (see right and page 24).

Connecting a special device

In step ! on page 19...

1Select “SPECIAL.”

The unit displays device names.

2Select the device you want to connect.

Registering using “SEARCH”

In step ! on page 19...

1Select “SEARCH.”

The unit searches for available devices and displays them. (If no available device is detected, “UNFOUND” appears.)

2Select the device you want to connect.

3Enter the specific PIN code of the device into the unit.

•Refer to the instructions supplied with the device to check the PIN code.

4Use the Bluetooth device to connect.

Now the connection is established and you can use the device through the unit.

3Use “OPEN” (see page 19) or “SEARCH” (see left) to connect.

Connecting/disconnecting a

registered device

1

2Select the registered device you want to connect/disconnect then enter the Bluetooth menu.

3Select “CONNECT” or “DISCONNECT” to connect/disconnect the selected device.

You can set the unit to connect a Bluetooth device automatically when the unit is turned on (see page 24).

20