ENGLISH
MP3/WMA playback
CD changer
Bluetooth
Symptoms | Remedies/Causes |
• Disc cannot be played back. | • Use a disc with MP3/WMA tracks recorded in the format |
| compliant with ISO 9660 Level 1, Level 2, Romeo, or Joliet. |
•Add the extension code <.mp3> or <.wma> to the file names.
• Noise is generated. | Skip to another track or change the disc. (Do not add the |
| extension code <.mp3> or <.wma> to |
| tracks.) |
|
|
• A longer readout time is required (“READING” | Do not use too many hierarchies and folders. |
keeps flashing on the display). |
|
|
|
• Tracks do not play back in the order you have | Playback order is determined when the files are recorded. |
intended them to play. |
|
|
|
• Elapsed playing time is not correct. | This sometimes occurs during play. This is caused by how the |
| tracks are recorded on the disc. |
|
|
• “NO FILES” appears on the display. | Insert a disc that contains MP3/WMA tracks. |
|
|
• Correct characters are not displayed (e.g. | This unit can only display alphabets (upper case), numbers, and |
album name). | a limited number of symbols. |
• “NO DISC” appears on the display. | Insert a disc into the magazine. |
|
|
• “NO MAGAZINE” appears on the display. | Insert the magazine. |
|
|
• “RESET 8” appears on the display. | Connect this unit and the CD changer correctly and press the |
| reset button of the CD changer. |
|
|
• “RESET 1” – “RESET 7” appears on the display. | Press the reset button of the CD changer. |
|
|
• The CD changer does not work at all. | Reset the unit (see page 2). |
• Bluetooth device does not detect the unit. | The unit can be connected with one Bluetooth cellular phone |
| and one Bluetooth audio player at a time. |
| While connecting a device, the unit cannot be detected from |
| another device. Disconnect currently connected device and |
| search again. |
|
|
• The unit does not detect the Bluetooth device. | • Check the Bluetooth setting of the device. |
| • Search from the Bluetooth device. After the device detects |
| the unit, select “OPEN” on the unit to connect the device (see |
| page 19). |
|
|
• The unit does not make pairing with the | • Enter the same PIN code into both the unit and the target |
Bluetooth device. | device. If the PIN code of the device is not indicated on its |
| instructions, try “0000” or “1234.” |
| • Select the device name from “SPECIAL,” then try to connect |
| again (see page 20). |
36