ENGLISH
To cancel Advanced SCM
You can cancel the Advanced SCM (Sound Control Memory), and unlink the sound modes and the playback sources
When shipped from the factory, a different sound mode can be stored in memory for each source so that you can change the sound modes simply by changing the sources.
•SCM LINK ON: Advanced SCM (different sound modes for different sources)
•SCM LINK OFF: Conventional SCM (one sound mode for all sources)
To set the clock display
You can set the clock to be shown on the lower part of the display when the unit is turned on. When shipped from the factory, the clock is set to be shown on the display.
•CLK DISP ON: Clock diplay is turned on.
•CLK DISP OFF: Clock display is turned off. When “CLK DISP OFF” is selected, the current sound mode setting (see page 19) is shown on the upper part of the display.
To select the level meter
You can select the level meter display according to your preference. When shipped from the factory, “NORMAL” is selected.
• | NORMAL: | Normal audio level meter (illuminates from bottom to top) |
• | REVERSE: | Level meter illuminates from top to bottom. |
• | WIDE: | Level meter illuminates from center to outside. |
• | RACE: | Level meter illuminates as if cars are racing. |
• | LEVEL OFF: | Level meter stays lit and does not change its illumination. |
• | ALL OFF: | Level meter turns off. |
To select the dimmer mode
When you turn on the car head lights, the display automatically dims (Auto Dimmer). When shipped from the factory, Auto Dimmer mode is activated.
•DIMMER AUTO: Activates Auto Dimmer.
•DIMMER OFF: Cancels Auto Dimmer.
•DIMMER ON: Always dims the display.
Note on Auto Dimmer:
Auto Dimmer equipped with this unit may not work correctly on some vehicles, particularly on those having a control dial for dimming.
In this case, set the dimmer mode to “DIMMER ON” or “DIMMER OFF.”
To turn on/off the key-touch tone
You can deactivate the
•BEEP ON: Activates the
•BEEP OFF: Deactivates the
26
