ENGLISH
Storing your own sound adjustments
You can adjust the sound modes (BEAT, SOFT, POP: see page 18) to your preference and store your own adjustments in memory.
3- 2 3- 1 2,4 1 | 3 |
1
Light “MODE” on the lower part of the display.
The number buttons can work as different function buttons.
REMEMBER you must finish the following steps while “MODE” is still on the display. Otherwise, the setting will be canceled.
2
Select the sound mode you want.
For details, see page 18.
3 1 | 2 |
To adjust the bass or treble level
1Select “BAS” or “TRE.”
2Adjust the bass or treble level.
To turn on or off the BBEII function
See page 17.
4
Press and hold SCM until the sound mode you have selected flashes on the display.
Your adjustment made for the selected sound mode is stored in memory.
5
Repeat the same procedure to adjust other sound modes.
To reset to the factory settings
Repeat the same procedure and reassign the preset values listed in the table on page 18.
20
