ENGLISH
Satellite radio operations
This unit is satellite (SAT) Radio
Before operating your satellite radio, refer also to the Instructions supplied with your SIRIUS Satellite radio or XM Satellite radio.
•“SIRIUS” and the SIRIUS dog logo are registered trademarks of SIRIUS Satellite Radio Inc.
•XM and its corresponding logos are registered trademarks of XM Satellite Radio Inc.
•“SAT Radio,” the SAT Radio logo and all related marks are trademarks of SIRIUS Satellite Radio Inc., and XM Satellite Radio, Inc.
Listening to the satellite radio
Connect either one of the following (separately purchased) to the CD changer jack on the rear of this unit.
•JVC SIRIUS radio
•XMDirectTM Universal Tuner
GCI (Global Control Information) update:
•If channels are updated after subscription, updating starts automatically.
The following appears and no sound can be heard.
–For SIRIUS Satellite radio: “Channels Updating XX%* Completed”
–For XM Satellite radio: “UPDATING”
•Update takes a few minutes to complete.
•During update, you cannot operate your satellite radio.
*Changes every 20% of update is completion, (ex. 20%, 40%, 60%).
Activate your SIRIUS subscription after connection:
1
2
JVC DLP starts updating all the SIRIUS channels. Once completed, JVC DLP tunes in to the preset channel, CH184.
3Check your SIRIUS ID, see page 16.
4Contact SIRIUS on the internet at <http://activate.siriusradio.com/> to activate your subscription, or you can call SIRIUS
Activate your XM subscription after connection:
•Only Channel 0, 1, and 247 are available before activation.
1
2
XMDirectTM Universal Tuner Box starts updating all the XM channels. “Channel 1” is tuned in automatically.
3Check your XM Satellite radio ID labelled on the casing of the XMDirectTM Universal Tuner
Box, or tune in to “Channel 0” (see page 22).
20
