JVC KD-S100 manual To adjust subwoofer output- S.woofer, source-VolAdj, 5Finish the procedure

To adjust bass and treble—Bass/Tre

1Select “Bass” or “Treble.”

2Adjust the bass or treble.

To adjust subwoofer output— S.woofer

1Adjust the output level.

2Select a cut-off frequency according to the connected subwoofer.

3Adjust the continuity of the sound among speakers (slope).

	To adjust the input level of each
	source—Vol Adj	ENGLISH
This setting is required for each source except for FM.
Once an adjustment is made, it will be memorized.
When you change the source, the volume level will
automatically increase or decrease according to the
adjusted level.

1Select a source before entering the SEL menu.

2Adjust to match the input level to the FM sound level.

General settings — PSM

You can change PSM (Preferred Setting Mode) items (except “Sirius ID”) listed in the table that follows.

1Enter the PSM menu (see page 4).

2Select a PSM item.

3Select or adjust the selected PSM item.

4Repeat steps 2 and 3 to adjust the other PSM items if necessary.

5Finish the procedure.

Continued on the next page

15