After installing the unit | JVC KD-S7350, KD-S690 specification

IMPORTANT

Notice the following information will help you to solve your problems.

Keep this IMPORTANT sheet together with the INSTRUCTIONS.

•After installing the unit

=Follow the procedure Å described below.

•If the unit does not operate

=Follow the procedure Å described below.

•If a CD is not ejected from the loading slot

=Follow the procedure ı described below. (If the procedure ı does not work, try the procedure Å.)

•If a CD is not recognized (“NO DISC” appears on the display) even though there is a CD in the loading slot

=Follow the procedure ı described below. (If the procedure ı does not work, try the procedure Å.)

•If a CD is in the unit, it will eject when you reset the unit. Pay attention not to drop the CD.

ÅTo reset the microcomputer

While holding SEL (select), press (standby/on/attenuator) for more than 2 seconds. This will reset the built-in microcomputer.

NOTE: Your preset adjustments—such as preset channels or sound adjustments—will also be erased.

(standby/on/ attenuator)

SEL (select)

ıTo eject a CD by force

While holding (standby/on/attenuator), press 0 (eject) for more than 2 seconds until the CD is ejected from the loading slot.

(“EJECT” and CD-in indicator flash on the display.)

(standby/on/
attenuator)	0 (eject)

GET0153-001A

Image 27

JVC KD-S7350, KD-S690 manual After installing the unit

Contents

KD-S7350 KD-S690For customer Use Information For U.S.A How to reset your unit Contents Location of the Buttons Control panelDisplay window Remote controller Place the battery Preparing the remote controllerInstalling the battery Remove the battery holder Basic Operations Turning on the powerTo drop the volume in a moment To turn off the power Clock H Clock M Setting the clock Searching a station manually Manual search Radio OperationsListening to the radio Searching a station automatically Auto search Tune in to a station you want while M manual is flashing FM station automatic preset SSMWhen an FM stereo broadcast is hard to receive Storing stations in memory Other stations into other preset Numbers Tuning in to a preset stationManual preset Repeat the above procedure to store Insert a CD into the loading slot CD OperationsPlaying a CD To stop play and eject the CD To go to a track quickly +10 To fast-forward or reverse the trackTo go to the next or previous tracks To go to a particular track directly While pressing CD, press and hold 0 for more than 2 seconds To cancel the prohibition and unlock the CDProhibiting CD ejection To play back tracks at random Disc Random Play For Preset values Sound AdjustmentsSelecting preset sound modes C-EQ custom equalizer Select the sound mode you want Adjusting the sound BASVOL Select Level if not shown on the display Level Select the desired modeOther Main Functions Selecting the level display Attaching the control panel Detaching the control panel Symptoms Causes Remedies Troubleshooting Handling discs Maintenance Specifications FM TunerAM Tuner Call Refer to page of How to Reset KD-S890/KD-S7350/KD-S690 Después de inspeccionarlas, colóquelas correctamente NotaRemarque Con esta unidad se suministran las siguientes piezas Be sure to ground this unit to the car’s chassis Electrical Connections Sound is distorted KD-S890 KD-S7350 KD-S690Fuse blows No sound from the speakers After installing the unit