|
| • | When “SCM LINK” is set to “LINK ON”, the | |||||
ENGLISH | ||||||||
|
| selected sound mode can be stored in memory | ||||||
|
| for the current source and the effect applies only | ||||||
|
|
| ||||||
|
|
| to the current source. Each time you change the | |||||
|
|
| playback source, the SCM indicator flashes on | |||||
|
|
| the display. |
|
|
| ||
|
| • | When “SCM LINK” is set to “LINK OFF”, the | |||||
| ||||||||
|
|
| selected sound mode effect applies to any source. | |||||
|
|
|
|
|
|
| ||
|
| Indication | For: | Preset values | ||||
|
|
|
|
| BAS | TRE | LOUD | |
|
|
|
|
|
|
| ||
|
| BEAT | Rock or disco | +02 | 00 | ON | ||
|
|
|
| music |
|
|
| |
|
|
|
|
|
|
| ||
|
| SOFT | Quiet | +01 | OFF | |||
|
|
|
| background |
|
|
| |
|
|
|
| music |
|
|
| |
|
|
|
|
|
|
| ||
|
| POP | Light music | +04 | +01 | OFF | ||
|
|
|
|
|
|
| ||
|
| SCM OFF | (Flat sound) | 00 | 00 | ON | ||
|
|
|
|
|
|
|
| |
Recalling the sound modes
When “SCM LINK” is set to “LINK ON,” Select the source.
The sound mode stored in memory for the selected source is recalled.
Notes:
•You can adjust each sound mode to your preference, and store it in memory.
If you want to adjust and store your original sound mode, see “Storing your own sound adjustments” on the right column.
•To adjust the bass and treble reinforcement levels or to turn on/off the loudness function temporarily, see page 17. (Your adjustments will be canceled if another source is selected.)
Storing your own sound adjustments
You can adjust the sound modes (BEAT, SOFT, POP) to your preference and store your own adjustments in memory.
•There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.
1 Call up the sound mode you want to adjust.
• See the left column for details.
2 Select “BAS (Bass),” “TRE (Treble)” or “LOUD (Loudness).”
3 Adjust the bass or treble level or turn the loudness function ON/OFF.
• See page 17 for details.
4 Repeat steps 2 and 3 to adjust the other items.
5 Press and hold SCM until the sound mode you have selected in step 1 flashes on the display.
Your adjustment made for the selected sound mode is stored in memory.
6 Repeat the same procedure to store other sound modes.
To reset to the factory settings
Repeat the same procedure and reassign the
preset values listed in the table on the left column.
18
