OTHER MAIN FUNCTIONS
ENGLISH
22
Changing the general settings (PSM)
You can change the items listed on the next page
by using the PSM (Preferred Setting Mode) control.
Basic Procedure
1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (See page 23.)
2 Select the PSM item you want to adjust. (See page 23.)
3 Adjust the PSM item selected.
4 Repeat steps 2 and 3 to adjust the other PSM items if necessary.
5 Finish the setting.
To select the level meter—LEVEL
You can select the level display according to your preference.
When shipped from the factory, “AUDIO 2” is selected.
•AUDIO 1: Shows the audio level indicator.
•AUDIO 2: Alternates “AUDIO 1” setting and illumination display.
• OFF: | Erases the audio level indicator. |
To select the dimmer mode—DIMMER
(Only for KD-SC800R)
When you turn on the car headlights, the display automatically dims (Auto Dimmer).
When shipped from the factory, Auto Dimmer mode is activated.
• AUTO: | Activates Auto Dimmer. | |
• | OFF: | Cancels Auto Dimmer. |
• | ON: | Always dims the display. |
Note:
Auto Dimmer equipped with this unit may not work correctly on some vehicles, particularly on those having a control dial for dimming.
In this case, set the dimmer mode to “ON” or “OFF.”
To select the telephone muting—TEL
This mode is used when a cellular phone system is connected. Depending on the phone system used, select either “MUTING 1” or “MUTING 2” whichever mutes the sounds from this unit. When shipped from the factory, this mode is deactivated.
•MUTING 1: Select this if this setting can mute the sounds.
•MUTING 2: Select this if this setting can mute the sounds.
• OFF: | Cancels the telephone muting. |
