RADIO OPERATIONS
ENGLISH
Listening to the radio
You can use either automatic searching or manual searching to tune in to a particular
station.
Searching a station automatically: Auto search
1 Select the band (FM1 – 3, AM).
Each time you press the button, the band changes as
follows:
FM1 
FM2 
FM3 
AM
Selected band appears.
Lights up when receiving an FM stereo broadcast with sufficient signal strength.
Note:
This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast.
received, press the same button you have
pressed for searching.
Searching a station manually: Manual search
1 Select the band (FM1 – 3, AM).
Each time you press the
button, the band changes as
follows:
FM1 
FM2 
FM3 
AM
Note:
This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast.
2 Press and hold ¢ 
or 4 
until “M” (manual) starts flashing on the display.
2 Start searching a station.
To search stations of higher frequencies
To search stations of lower frequencies
When a station is received, searching stops.
CONTINUED ON THE NEXT PAGE
7
