Selecting the display color |
| Changing the standard plate |
|
|
|
ENGLISH
This section is only for KD-SC800R.
You can select the color of the display according to your preference.
When shipped from the factory, “ALL DEMO” is selected.
1 Press and hold DISP (display) for a while.
The last selected setting appears on the display.
2 Select the setting or color you want.
Each time you press the button, the selection changes as follows:
ALL DEMO O SOURCE O BLUE O OCEAN O PURPLE O PINK O ROSE O RED O (back to the beginning)
•When “ALL DEMO” is selected:
The display color changes every 6 seconds. (rose = pink = ocean = red = purple
= blue = back to the beginning)
•When “SOURCE” is selected:
The display color is fixed to red while listening to FM or AM, and to blue while listening to CD.
3 Finish the setting.
Note:
If no operation is done for about 15 seconds or if any other button is pressed, the setting is also finished.
This section is only for
You can change the standard plate with another plate supplied with your unit.
You can also download them by visiting <http://www.jvc.co.jp/jvccar>.
•When changing the plate, be careful not to leave your fingerprints on the plate or cover.
1 Loosen the screws with the supplied hex screwdriver.
2 Remove the plate cover and the standard plate.
Standard plate
Plate cover
24
