JVC KD-SX1500R manual Changing the initial display mode, Turning on/off the level meter, English

ENGLISH

Changing the initial display mode

You can change the initial indication on the lower part of the display while playing any source. When shipped from the factory, “Normal” is selected.

• Normal:	With this setting selected, the indication selected by pressing DISP (display)
	remains on the display until you change it.
• Clock:	Clock time appears.

• Level Meter: Audio level indicator appears.

1Press and hold SEL (Select) for more than 2 seconds so that “PSM” appears on the display.

2Press ¢ or 4 to select “Display,” if not shown on the display. The current setting for this function also appears.

3Rotate the control dial until the setting you want appears on the display. As you rotate the dial, the indication changes as follows:

Normal Clock

Level Meter*

4Press SEL to finish the setting.

Notes:

•Though “Clock” or “Level Meter” is selected, you can show the other indications for a while by pressing DISP.

*You can select “Level Meter” only when “Level Meter” is set to be activated. See below.

Turning on/off the level meter

You can turn on or off the level meter indication.

When shipped from the factory, “Level Meter On” is selected.

•Level Meter On: Level meter is turned on.

•Level Meter Off: Level meter is turned off.

1Press and hold SEL (Select) for more than 2 seconds so that “PSM” appears on the display.

2Press ¢ or 4 to select “Level Meter,” if not shown on the display. The current setting for this function also appears.

3Rotate the control dial until the setting you want appears on the display.

•To select “Level Meter On,” rotate it clockwise.

•To select “Level Meter Off,” rotate it counterclockwise.

Level Meter On Level Meter Off

4Press SEL to finish the setting.

28