JVC KD-SX1500R Controlling the volume automatically Audio Cruise, Finish the setting, English

Models: KD-SX1500R

1 50
Download 50 pages 41.94 Kb
Page 24
Image 24
Controlling the volume automatically (Audio Cruise)

ENGLISH

Controlling the volume automatically (Audio Cruise)

You can select the proper cruise mode for your car.

This unit change the volume level automatically (at 3 possible levels) based on the driving speed of your car by detecting the alternator’s generating frequency (Audio Cruise).

If you want to use this mode, follow the procedures below. When shipped from the factory, this mode is set to “Cruise Off.”

Cruise 1: Select this if your car is relatively quiet.

Cruise 2: Select this if your car is relatively loud.

The volume increase rate is twice as much as that of the Cruise 1 setting.

• Cruise Off: Cancels Audio Cruise.

3

1, 4 2

1

Press and hold SEL (Select) for more than 2

SEL

seconds so that “PSM” appears on the display.

2

Select “Cruise Mode,” if not shown on the display.

The current setting for this function also appears.

3

Select the Audio Cruise setting you want.

SEL

3 Cruise 1 Press and hold SEL (Select) for more than 2seconds so that “PSM” appears on the display. Cruise 2 Select “Cruise Mode,” if not shown on the display.Select the Audio Cruise setting you want. Cruise Off  Cruise 1  Cruise 2  Cruise Off

4

Finish the setting.

SEL

24

Page 24
Image 24
JVC KD-SX1500R manual Controlling the volume automatically Audio Cruise, Press and hold SEL Select for more than, English