JVC KY-F70B Settings and adjustments for recording, Setting the dip switches, Scsi ID settings

3. Settings and adjustments for recording

Setting the dip switches

The type of PC monitor to use and the ID during SCSI connection are set using the dip switches.

Dip switches

SCSI

REC

SEND AW/SEL MODE

MENU UP DOWN SET

PLAY

FREEZE

MONITOR LENS

REMOTE	DC IN
ON 1 2 3 4	POWER

CAUTION

Turn the power off before setting the dip switches. Setting the switches with the power on will not change the set- tings.

SEE INSTRUCTION MANUAL

Monitor output settings

Dip switch no. 3 is set depending on whether using a system which uses a commercially avail- able VGA monitor or a system which uses a capture board. <Default setting: OFF>

ON 1 2 3 4		VGA output setting
		Set when directly connecting a VGA monitor to the MONITOR ter-
		minal on the rear of the main unit.
	Set to OFF

ON 1 2 3 4

Set to ON

SXGA output setting

Set for systems using a capture board.

The signal from the MONITOR terminal on the rear of the main unit is inputted through the analog input compatible video capture board. (
Page 68 Capturing images using the image capture board)

SCSI ID settings

DiP switches 1 and 2 are set depending on the used system to set the SCSI ID. <Default ID: 7>

ON 1	2 3	4		Set when connecting a printer or MO drive unit directly to the main
			ID=7	unit. When making this setting, the main unit will become the initia-
				tor.
ON 1	2 3	4

ID=6

ON 1 2 3 4

ID=5

ON 1 2 3 4

ID=4

Set when exporting images to a PC.

Make sure that the ID numbers of the connecting devices are not the same.

When making this setting, the PC will become the initiator and the main unit will become the target.

(
Page 66 Connecting to a PC)

E24